Master Bond MB297Med-1 is a single component ethyl cyanoacrylate adhesive. This high strength, rapid curing system is used primarily for medical device assembly. MB297Med-1 is a moderate viscosity (1,000-1,100 cps) cyanoacrylate. This kind of system, which is commonly referred to as an instant adhesive or super glue, cures very rapidly with the rate of cure dependent upon the humidity—the higher it is, the faster the cure. As curing is typically so fast, minimal contact pressure is usually sufficient for bonding. It must be emphasized that this high strength system requires no heating or mixing. It sets up within 15-45 seconds depending upon the humidity and the substrates. The bond strength is exceptionally high in the shear mode. MB297Med-1 bonds well to a variety of substrates especially metals, plastics and rubbers. Most importantly, MB297Med-1 meets USP Class VI specifications for biocompatibility. It has first rate resistance to EtO and gamma sterilization processes. The service temperature range for this system is -60°F to +250°F. MB297Med-1 can be used in a wide array of different medical applications ranging from repair to high speed production. Although many of the applications for MB297Med-1 involve disposable type medical devices, it also can be utilized with reusable ones depending upon the service conditions.
Product Advantages
- Rapid curing at room temperature; usually sets up within 45 seconds
- No heating or mixing
- Contact pressure usually sufficient for fixturing
- Bonds well to a wide variety of substrates
- Excellent resistance to EtO and gamma sterilization
- Passes USP Class VI testing
- Well suited for disposable and reusable medical devices
