Supreme 10 Product Description

Master Bond Polymer Adhesive Supreme 10 represents a breakthrough in epoxy adhesive technology featuring a hitherto unattainable balance of performance properties including both high shear and high peel strengths. This one component adhesive system is formulated to cure at elevated temperatures e.g. 1 hour at 225°F-250°F, longer times at lower temperatures for maximum bond strengths. Tensile shear strengths in excess of 3500 psi and T-Peel strengths of 30 pli are readily obtained. No mixing is necessary prior to use. Master Bond Polymer Adhesive Supreme 10 produces truly exceptionally good performance bonds with both high shear and high peel strength for service in the remarkably wide temperature range of below -100°F to over 350°F. It offers very superior resistance to impact, thermal shock, vibration and stress fatigue cracking while maintaining the moisture, creep, corrosion and thermal resistance typical of epoxy resin adhesives. Master Bond Polymer Adhesive Supreme 10 can be applied without sagging or dripping even on vertical surfaces. It is 100% reactive and does not contain any diluents or solvents.

Master Bond Polymer Adhesive Supreme 10 produces durable high strength, exceptionally, tough bonds which are remarkably resistant to severe thermal cycling and many chemicals including water, oil, fuels and most organic solvents even upon prolonged exposures. Unlike many other epoxy adhesives, its performance is relatively insensitive to changes in cure schedules or substrate cleaning procedures. Adhesion to metals, glass, ceramics, wood, vulcanized rubbers and many plastics is excellent. The hardened adhesive is a superior thermal insulator. Color is gray. Master Bond Polymer Adhesive Supreme 10 offers the convenience of a heat cure with no mixing prior to use and a uniquely favorable bonding performance for even the most difficult application in the aerospace, electronic, electrical, computer, metalworking, appliance, automotive and chemical industries.